The newest BETA VERSION 0.8b of my VCV Rack Modules Pack for Mac/PC/Linux They currently work with Rack 0.3.2 (current release at the moment), not with 0.3.1.
At the moment the available modules are:
-LFO with CV input wih attenuator control, Normal/Slow control and differnt Waveforms
-A Clock Divider Module with 2,4,8,16, 32 Divisions
-Simple but handy 1x8 and 2x8 Multiples
-8-Steps Sequencer. (This is Exactly the same as the fundamentals SEQ3, but Gates don't "fuse" into one another
-16-Steps Sequencer. (Just like the 8-Steps but with 16...)
-A Fixed Filter Bank, with 8 controls for frequenceis ranging from 62.5 Hz to 8KHz
-A Foldback Distortion unit, with CV control and attenuator
-A Bitcrusher Module, ro reduce signal to8, 4, 2 bits and reduce Samplerate
1) Download the ZIP file HERE
2) Inside the ZIP there's a folder named "Autodafe". Extract it in your Rack/plugins/ folder (both on MAC or PC). Final Path should be: Rack/plugins/Autodafe
3) Run Rack, you should be able to see the modules with right-click. If something doesn't work just delete the "Autodafe" folder in Rack/plugins
4) If they work on your system and you like the results, please consider a donation (see below).... I spent countless hours developing these first modules, more will come shortly.
Any feedback appreciated here in the comments, or on facebook (https://www.facebook.com/autodafe.net/)
Donations are welcome as always. Many thanks in advance!